-
lordkrishna.ew@gmail.com -
View Mobile Number - Send SMS
- Send Email
- GST No. 06ABMPU3457G1ZA
 |
|
Testing Machines
Leading Manufacturers, Exporters, Wholesaler and Retailer of Anchor Pull Load Tester, Gear Roll Tester (Parkinson Type), Gear Teeth Run Out Checking Gauge, Leakage Testing Machine, Online Inspection System, Pin on Disc Wear Testing Machine, Rope Strength Testing Machine, Pressure Gauge Comparison Pump and Shock Absorber Tester from Faridabad.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Usage | Textile Testing Instrument |
| Power | Electronic |
| Sensitivity | 10 gm |
| Type | Automatic |
| Capacity | 30 kg |
| Size | 91X43X32 cm |
| Strength | 2.2 n/mm2 |
| Weight | 5.0 Kg |
| Warranty | 12 Months |
| Grip buttons | 5mm to 25mm |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Application | Industrial, Laboratory |
| Type | Bevel gear rolling testing |
| Power | Hydraulic |
| Usage | Tester |
| Dimension | (L*W*H) 380*150*250 mm |
| weight | 6.1kg |
| Delivery Time | 2 weeks |
Features:
- Smooth functioning
- Durable
- Elegant look
Machine Type-
- Manual Machine with Dial Type Gauge
- Manual Machine with Digital Gauge
- Motorized Machine with Digital Gauge & Adjustable Speed
- Motorized Machine with PLC & HMI
- Computerized Machine
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Applicable Scope: | 300mm/400mm/500mm/600mm/800mm/1000mm/1500mm |
| Material | Steel |
| Resolution | 0.1um/0.01um/1um |
| Measuring range | 0 to 1700um (0 to 67.8 mils); |
| Power supply | 2 x 1.5V(AAA alkaline) |
| Accuracy | 3%+2um)/ (3%+0.1mils) |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Operation | Manual (LTM-14K1) / Automatic-PLC Controlled (LTM-14K2) |
| Leakage Testing Media: | Air / Oil / Water |
| Application | This machine checks leakage in components / assemblies. |
| Condition | New |
| Power | Electric |
| Voltage | 220V |
| Delivery Time | 10-15 days |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Size | 3, 300 x 2, 860 x 2, 560(H) |
| Weight | 6, 000 Kg |
| Speed | 200BPM |
| Voltage | Input 220~460v |
| Machine Power | 220V, 3 Phase, 50/60Hz |
| Frequency | 50-60 Hz |
Area of Application-
- Machining Line
- Assy Line
- Press Line
- Any Engineering line where you feel
Benifit of On Line Inspection-
- No extra man power required
- No wastage of time
- Defective parts eject from line automatically
- 100% safe and free from human errors
- Very low running cost (after installation cost)
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Weight | 100-500kg |
| Voltage | 110V |
| Condition | New |
| Automatic Grade | Automatic |
| Power | 3-5kw |
| Brand | Brand |
| Grade | Manual, Semi-Automatic, Automatic |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Driven Type | Electric |
| Grade | Manual, Semi-Automatic, Automatic |
| Condition | New |
| Display Type | Analog , Digital |
| used | It is used to test breaking load of a Rope / Wire / Cable. |
| Type | It is a Horizontal Testing Machine. |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Size | 4inch, 6inch |
| Type | Pressure Gauges |
| Material | Stainless Steel |
| Diameter | 20-40mm, 40-60mm |
| Shape | Round |
| Color | Silver |
| Condition | New |
| Automatic Grade | Automatic |
| Pressure | 0-5000psi |
We are the prominent Manufacturer and Supplier of Pressure Gauge Comparison Pump based in India. Our Pressure Gauge Comparison Pump is a hydraulic comparison pump that uses any hydraulic oil as pressure medium. Pressure Gauge Comparison Pump that we offer features a screw below the reservoir, which can be removed to fill the oil and screwed for avoiding unnecessary leakage. It features a BSP female connection at the front and a BSP male connection with a cap at the side of the pump.
Procedure :
- At the front there is a BSP female connection.
- Put the master gauge in that connection.
- At the side of the pump there is a 1/4 BSP male connection with a cap.
- Fix one side of the cable there and other end to the gauge to be calibrated.
- Tighten the release valve.
- First prime the pump.
- To prime push the rod below the reservoir.
- Hold the rod pushing and start pumping.
- When priming is over release the push rod.
- In this position, the gap between the two handles is less.
- At the time of priming the handle position will be wider.
- There is a black knob which is used for fine adjust of the gauge.
- To release the pressure open the release valve.
Details :
- Lightweight hand held hydraulic pressure pump
- Pressure can be generated with fewer strokes by hand
- Generates pressure up to 400 Kg/cm2
- Top BSP (F) adopter for the Master gauge
- Side flexible tubing with BSP (F) adopter for gauges to be tested
- Side release knob for pressure
- Side zero adjuster knob
- Hydraulic Oil container
- Accuracy: +/- 0.5%
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Type | Shock Absorbers |
| Material | Metal |
| Shape | Round |
| Use | Automobile Industry |
| Color | Blue |
| Condition | New |
| Dimension | 10-20mm, 20-30mm |
| Structure | Hard |
| Features | Easy To Fit, Good Quality, Heat Resistant, High Grip, Tough And Tensile, etc. |
| rubber thickness | 10-20mm, 20-30mm, 30-40mm |
The company is a renowned Manufacturer and Supplier of Shock Absorber Tester (SPM) used for testing telescopic type shock absorbers installed in various types of vehicles. Our Shock Absorber Tester is mechanically or digitally controlled. It is also provided with an option of either operating it manually, semi-automatically or fully automatically. Our Shock Absorber Tester is known for high efficiency, durability and reliability.
Specifications :
- Display - Analogue type or digital
- Operation Manual, motorized or digitally controlled
