Pressure Gauge Comparison Pump

We are the prominent Manufacturer and Supplier of Pressure Gauge Comparison Pump based in India. Our Pressure Gauge Comparison Pump is a hydraulic comparison pump that uses any hydraulic oil as pressure medium. Pressure Gauge Comparison Pump that we offer features a screw below the reservoir, which can be removed to fill the oil and screwed for avoiding unnecessary leakage. It features a BSP female connection at the front and a BSP male connection with a cap at the side of the pump.

Procedure :

• At the front there is a BSP female connection.
• Put the master gauge in that connection.
• At the side of the pump there is a 1/4 BSP male connection with a cap.
• Fix one side of the cable there and other end to the gauge to be calibrated.
• Tighten the release valve.
• First prime the pump.
• To prime push the rod below the reservoir.
• Hold the rod pushing and start pumping.
• When priming is over release the push rod.
• In this position, the gap between the two handles is less.
• At the time of priming the handle position will be wider.
• There is a black knob which is used for fine adjust of the gauge.
• To release the pressure open the release valve.

Details :

• Lightweight hand held hydraulic pressure pump
• Pressure can be generated with fewer strokes by hand
• Generates pressure up to 400 Kg/cm2
• Top BSP (F) adopter for the Master gauge
• Side flexible tubing with BSP (F) adopter for gauges to be tested
• Side release knob for pressure
• Side zero adjuster knob
• Hydraulic Oil container
• Accuracy: +/- 0.5%